Free PPE Inspection Checklist for Excel

A weekly pre-use checklist the wearer ticks before work, plus the log and register behind it: an item that fails stays DO NOT USE until it is replaced, a hard hat past its replacement date reads REPLACE, and periodic inspections show OVERDUE or DUE SOON. Works in Microsoft Excel and Google Sheets.

Preview of the PPE register with item ID, type, assigned worker, status (replace, due soon, do not use, overdue, in service) and next inspection date

What a PPE inspection covers

Personal protective equipment only protects if it is in good condition. Workplace safety rules require PPE to be kept clean and reliable and damaged items to be taken out of use, so the routine has two parts: the wearer checks their own PPE before each use, and a supervisor or safety officer inspects it at set intervals and replaces what has worn out or passed its date. Which PPE each area needs in the first place is decided earlier, in a PPE hazard assessment.

The Pre-Use Checklist prints one sheet per worker per week, a column per day. Leave out the rows that do not apply to the job:

  • Head: hard hat shell free of cracks, dents and chalking; suspension intact and adjusted; within its replacement date.
  • Eyes and face: glasses or goggles clean and unscratched, frames and straps intact, face shield visor clear.
  • Hearing: earmuff cushions soft and the headband holding; earplugs clean and in stock.
  • Breathing: respirator facepiece and valves intact, straps elastic, filters or cartridges in date, a seal check before use.
  • Hands, feet and body: the right gloves without cuts or holes, safety boots with the toe cap covered and soles intact, a clean hi-vis vest with its reflective tape.

A ticked sheet shows someone looked. It cannot tell you that the hard hat in the gang box is nine years old. So the workbook keeps the record behind it:

Inspection Log. One row per periodic inspection, issue or replacement, and any pre-use check that finds a defect, with PASS or FAIL. A FAIL stays an OPEN DEFECT until you enter the date it was resolved.

PPE Register. One row per item you track (hard hats, respirators, earmuffs, boots, goggles), with the worker, crew or area it is assigned to. It runs two clocks from the PPE Types tab: the periodic inspection interval per type (monthly for respirators and gloves, quarterly for most, six months for boots), and a replacement date for types with a service life, such as five years for a hard hat shell. Status reads DO NOT USE while a defect is open, REPLACE past the replacement date, OVERDUE when the inspection is late, DUE SOON before either, and IN SERVICE otherwise.

For fall protection, use the dedicated safety harness inspection checklist; for emergency eyewash stations, the eyewash station inspection checklist.

Who uses a PPE inspection checklist

Wherever people wear hard hats, respirators, hearing protection or safety boots at work.

Construction contractors

Hard hats, eye protection, gloves and boots across crews and sites.

Manufacturing plants

Hearing protection on loud lines, face shields at grinders, gloves at presses.

Warehouses

Hi-vis, safety boots and cut-resistant gloves for pickers and drivers.

Laboratories and chemical handling

Goggles, face shields and respirators with cartridges on a schedule.

Utilities and field service

PPE that travels in the truck and gets checked away from the shop.

Safety officers

Who has which item, what is due for inspection and what must be replaced.

Before you fill it in

The cracked hard hat was reported on Monday. It is back on the shelf.

Try UNIO24 to automate PPE inspections.

Try UNIO24 Free

A spreadsheet goes out of date within days, and keeping it current takes someone's time every week. UNIO24 automates that work: each check, defect and replacement updates the item's record as it happens.

Your PPE register, six months in
The same check in UNIO24
A submitted PPE pre-use inspection in UNIO24 for a 3M SecureFit hard hat: the shell item marked failed with the comment "Crack in the shell above the brim", the suspension, eye, hearing and glove items marked pass
UNIO24Mobile during a PPE pre-use inspection: the hard hat shell question marked Fail with the comment "Crack in the shell above the brim"
Feature comparison
CapabilityFree TemplateUNIO24 FreeRecommended for safety teams
Inspections
PPE pre-use checklistThe template prints a weekly sheet per worker. UNIO24 runs your checklist on the worker's phone.PartialYes
Photos of the damageThe cracked shell or the torn strap, attached to the check.NoYes
Defects and due dates
Take damaged PPE out of useThe register shows DO NOT USE from the log. UNIO24 records the defect against the item until it is resolved.PartialYes
Inspection and replacement datesBoth track them. UNIO24 also schedules the next inspection.PartialYes
Data & reliability
Who has which itemThe register keeps a name per row. UNIO24 tracks each item with the person it was issued to and its history.PartialYes
Many crews and sites at onceA shared file gets overwritten. UNIO24 handles simultaneous users.PartialYes
Full support0/ 66/ 6

Frequently Asked Questions

About PPE inspections and the template

Is the PPE inspection checklist free?

Yes. No cost, no subscription, no card. Enter your name and email and the Excel file downloads instantly.

How long does a hard hat last?

Many makers give about five years for the shell from the date of manufacture, and a year or so for the suspension, but read the label: the date is moulded inside the shell. Replace sooner after any impact, a crack, chalking or fading. The register counts five years from issue by default and shows REPLACE when it runs out.

Does the template track PPE issued to each worker?

Yes, as far as inspection goes: each tracked item has an Assigned To column and an Issued / Replaced date in the log. Consumables such as earplugs and disposable gloves are better handled as stock than as individual items. If you need a signed issue record per worker, the equipment sign-out sheet with its printable checkout form does that job.

How often should PPE be inspected?

By the wearer before each use, and by a supervisor or safety officer at intervals your PPE program sets. The template starts at monthly for respirators and gloves, quarterly for hard hats, eye and hearing protection and hi-vis, and every six months for safety boots; change them per type on the PPE Types tab.

What should I do with damaged PPE?

Take it out of use at once, replace it from stores, and record the defect so nobody puts it back on the shelf. Cut it, mark it or bin it if it cannot be repaired. In the template the item stays DO NOT USE until you enter the date the defect was resolved.

Should harnesses go on this checklist?

Fall protection has its own inspection routine, with a competent-person inspection and removal from service after a fall. Use the safety harness inspection checklist for harnesses, lanyards and lifelines.

up arrow